- Is the Florest Wood Deck a natural wood?
- What kind of woods are the Florest Wood Deck Made of?
- Is the Florest Wood Deck a hardwood or softwood?
- What is the moisture content of Florest Wood Deck?
- What is the standard size of Florest Wood Deck?
- What is the weight per piece of Florest Wood Deck?
- What kind of plastic is using for the supporting frame of Florest Wood Deck?
- What is the outsanding characteristic of Polypropylene (PP)?
- How does each timber strip capture with support plastic frame?
- Can galvanized steel screw be rust after installation in the future?
- What is the useful life of Florest Wood Deck?
- Will Red Wood/Teak/Mixed Tropical Wood turn grey?
- Should we cover wood deck?
- Does this Florest Wood Deck come with prefinished?
- What tools will I need for installation?
- What skill level is required to install the wood decking tiles?
- What kind of sub-floor is suitable for installing Florest Wood Deck?
- How to prepare sub-floor before installation?
- How to make the good installation in the irregular edge area?
- What if I have a curved area on deck?
- Is there any constraint in term of cutting Florest Wood Deck to fit the required area?
- Can the wood deck be installed on a surface that is not completely level?
- Can the decking tiles be moved once they are installed?
- Is there any expansion of Florest Wood Deck after installation from water and heat?
- What are the applications of Florest Wood Deck?
- What are the benefit of multiple grooves on each piece of wood?
- Does Florest Wood Deck has a warranty?
- Where can I buy the Florest Wood Deck?
- Can we request for special size of Florest Wood Deck?
1. Is the Florest Wood Deck a natural wood?
Yes
Back to top
2. What kind of woods are the Florest Wood Deck Made of?
Red Wood (Daeng) and Teak Wood.
Back to top
3. Is the Florest Wood Deck a hardwood or softwood?
Florest Wood Deck is a hardwood.
Back to top
4. What is the moisture content of Florest Wood Deck?
15%-18%
Back to top
5. What is the standard size of Florest Wood Deck?
45x45x3.3 cm.
Back to top
6. What is the weight per piece of Florest Wood Deck?
3.7 Kg.
Back to top
7. What kind of plastic is using for the supporting frame of Florest Wood Deck?
Polypropylene (PP)
Back to top
8. What is the outsanding characteristic of Polypropylene (PP)?
Strong, Durable and Resistant to all kinds of weather condition.
Back to top
9. How does each timber strip capture with support plastic frame?
Use galvanized steel screw to capture.
Back to top
10. Can galvanized steel screw be rust after installation in the future?
Galvanized steel screw can be free from rust for a long time after installation.
Back to top
11. What is the useful life of Florest Wood Deck?
10-18 years
Back to top
12. Will Red Wood/Teak/Mixed Tropical Wood turn grey?
Yes in full exposure the surfaces exposed to the sun will probably start turning grey within 4-6 months. If your wood deck is under cover, it may take as long as 12-18 months for the top surface to grey out.
Back to top
13. Should we cover wood deck?
Yes. While Red Wood and Teak Wood is highly durable, it must always be remembered that it is a 100% natural product and it will weather and be affected by adverse weather conditions and gray in the sun. Two coats on the exposed surfaces are all that should be required.
Back to top
14. Does this Florest Wood Deck come with prefinished?
No, it comes with unfinished
Back to top
15. What tools will I need for installation?
No special tools are required.
Back to top
16. What skill level is required
to install the wood decking tiles?
It is very easy to install because the Florest wood deck has interlocking system which the tiles can be locked securely and precisely in place with just a gentle push.
Back to top
17. What kind of sub-floor is suitable for installing Florest Wood Deck?
The most suitable sub-floor is concrete floor.
Back to top
18. How to prepare sub-floor before installation?
The sub-floor should be level and has a little bit slope for drainage
purpose.
Back to top
19. How to make the good installation in the irregular edge area?
The square panel of Florest wood Deck can be cut to any size and any shape.
Back to top
20. What if I have a curved area on deck?
Decking tiles are simply cut with a handsaw. Any screws that might be in the way you will cut need to be removed and then replace after cutting the tile.
Back to top
21. Is there any constraint in
term of cutting Florest Wood Deck to fit the required area?
Yes, each wood stripe must has at least 2 capture points to hold wood stripe with
Back to top
22. Can the wood deck be installed on a surface that is not completely level?
Yes, the Polypropylene plastic base has good flexibility to all the
deck tiles to be laid on uneven surfaces. However, excessive unevenness
of the surface will need to resurface before installation.
Back to top
23. Can the decking tiles be moved once they are installed?
Yes, the decking tiles can be easily taken up and re-installed in a new location.
Back to top
24. Is there any expansion of Florest Wood Deck after installation from water and heat?
Florest Wood Deck has minimum expansion and contraction from heat and water after installation.
Back to top
25. What are the applications of Florest Wood Deck?
Florest Wood Deck is for both residential and commercial applications. It can be installed on the glass lawn, in the bathroom or shower, around pool side, on terrace, on the walk path around garden and in the spa.
Back to top
26. What are the benefit of multiple grooves on each piece of wood?
The benefits of multiple grooves are
1. Help prevent against slippery.
2. Reduce the heat and glare of sunlight.
Back to top
27. Does Florest Wood Deck has a warranty?
No, we do not provide warranty for the wood since it is natural product. However, we guarantee plastic supporting frame for 5 years.
Back to top
28. Where can I buy the Florest Wood Deck?
Please contact us for information of our nearest distributors or dealer.
Back to top
29. Can we request for special size of Florest Wood Deck?
Please contact our sales representative for specific required size.
Back to top
